Deck Refinishing Deck Sealing Deck Painting Deck Staining by Business in Colorado

Your Go-To Team for deck staining in Denver, CO

Tidy work, clear communication, zero hassle – that’s Front Range Paint Pros’s way of doing deck staining.
Deck staining in Denver starts with surface prep, not the stain itself. That means cleaning off old coating, sanding raised grain, and priming any wood that’s dried out or damaged before a single drop of product goes on. Get that prep right on a wood deck staining project in Denver CO and the finish holds. Skip it and you’re re-staining in two years.
Front Range Paint Pros workers preparing paint
We don’t call a job finished until you’ve walked the deck with us and signed off. You leave with a finish you’ve personally confirmed meets your standards, backed by a written workmanship warranty.

Recent deck staining Projects in Denver

Houses painted
0 +
Client Satisfaction
0 %
Years of Experience
0 +

Signs You Need deck staining

Benefits of deck staining

Not Sure If You Need deck staining? Here’s What to Know

Your deck has gone gray or silver and looks weathered even after a good cleaning. The original wood color is gone and the surface has that flat, sun-bleached look.
A deck surface that holds color and protection through Denver’s high-altitude sun longer than a DIY rolled-on application.
Water soaks into the deck boards instead of beading up and rolling off. Once the wood is absorbing moisture like that, every rain and snowmelt is working its way deeper into the grain.
Deck boards that go into Denver’s freeze-thaw winters sealed against moisture, reducing the cracking and checking that splits unprotected wood by spring.
The existing stain is peeling, flaking, or bubbling in sections. The surface feels rough or splintered underfoot where the coating has lifted unevenly off the wood.
Gray, peeling boards restored to a clean, even finish that matches your home’s exterior trim color.
You can see visible cracks, checks, or raised grain running along the boards. The wood has dried out and moved through enough temperature swings that the surface is open and vulnerable to whatever comes next.
A finish that holds for two to five years instead of failing in two, because prep is included in the job.

Deck Staining Materials, Pricing and What's Included

We use Sherwin-Williams and Benjamin Moore products selected for Colorado’s UV intensity and temperature variability. Both lines offer formulations suited to Denver area conditions, and product selection is matched to your wood type and how exposed the deck is.Deck staining costs vary by square footage, current wood condition, and how much prep is required. Heavily weathered decks needing significant sanding or stripping will run more than decks in sound condition. For a number specific to your project, reach out for a free estimate.

Why Choose Front Range Paint Pros for Your Next deck staining Project

Front Range Paint Pros worker painting home exterior

Local Painters. Real Results.

Denver homeowners have trusted us with their homes for over 9 years. We’d love to earn yours too.
Front Range Paint Pros has been family-owned and locally operated since 2017, based right here in the Denver metro.

Our prep and products are matched to Denver’s altitude, UV load, and freeze-thaw winters. We use Sherwin-Williams and Benjamin Moore products matched to Denver’s conditions. Every project includes a written workmanship warranty and final walkthrough.

FAQs About Our deck staining Services

Deck staining costs in Denver vary based on square footage, wood condition, and how much surface preparation is required. A heavily weathered deck that needs cleaning, sanding, and priming will cost more than a deck in good condition that needs a straightforward recoat. Call us at 720-831-8998 or reach out through frontrangepaintpros.com/contact for a free on-site estimate specific to your deck.
Sometimes yes, sometimes no - it depends on the condition of the existing stain. If it's peeling, flaking, or has lost adhesion, it needs to come off before a new coat can go on. Staining over failed coating just locks in the problem and leads to early failure on the new coat too. If the existing stain is in sound condition, a compatible product can often be applied after cleaning. The on-site estimate is where we assess which situation you're dealing with.
The process includes power washing or cleaning the surface to remove dirt, mold, and old coating residue, sanding rough or raised grain, and priming or conditioning wood that's dried out or damaged. In Denver, where high-altitude UV and temperature swings dry out wood faster than at lower elevations, thorough prep before any stain product goes on is especially important.
Most quality deck stains hold up for two to five years in Colorado, though south-facing or fully exposed Denver decks can see shorter lifespans because of the high-altitude UV load and freeze-thaw cycles. Starting with thorough prep pushes that range toward the longer end.
We use Sherwin-Williams and Benjamin Moore products, selected based on your wood type, current condition, and how much UV and weather exposure your deck faces. Both lines offer formulations suited to Colorado's high-altitude climate, and we match the specific product to what your deck actually needs.
Yes. We provide staining services for both wood decks and fences throughout the Denver metro area and broader Front Range communities.
Colorado puts real demands on deck stains: high-altitude UV intensity, dry summers, and hard freeze-thaw cycles in winter. Products from Sherwin-Williams and Benjamin Moore with UV-blocking and water-repellent properties hold up well in these conditions. We select from both lines based on your specific wood type and how exposed your deck is to sun and weather.
Early-to-mid fall in Denver is generally workable, but the window is shrinking. Stain needs temperatures above 50°F during application and for several hours after, and Front Range winters bring hard freezes, so late October and November carry real risk. June through September, when humidity in the Denver area drops below 50% and daily sunshine averages 11.8 hours through the summer months, is the most reliable window.
Most residential deck staining jobs take one to two days, depending on deck size and how much preparation the wood needs. Decks requiring significant stripping or sanding will take longer than decks in good condition. The Denver area's low summer humidity, which drops below 50% from June through September, speeds up drying between coats, keeping most jobs at the lower end of the one-to-two-day range.
Yes. Every project comes with a written workmanship warranty. Warranty terms are discussed at the estimate and the written warranty is handed over at the final walkthrough before sign-off. A final walkthrough is completed before sign-off to confirm the finish meets your expectations.
June through September is the optimal window for deck staining in Denver. Humidity in the Denver area drops below 50%, daily sunshine averages 11.8 hours through June through August, and temperatures stay consistently above the thresholds needed for proper adhesion and cure. Spring can work but requires watching for rapid temperature shifts. Late fall carries increasing risk as temperatures approach the freezing range.
We serve Denver and surrounding communities including Littleton, Arvada, Englewood, Lakewood, Aurora, Centennial, Wheat Ridge, Golden, Highlands Ranch, Dakota Ridge, and Castle Rock.

We Take Care Of Every Step in the deck staining Process

Image with color palete suggesting 1st step in the painting process

1

Share Your Project
Call us at 720-831-8998 or use the contact form at frontrangepaintpros.com/contact to tell us about your deck. A local team member will follow up to schedule a free on-site estimate, take a look at the wood’s current condition, and confirm what prep and product the job actually needs before anything is priced or scheduled.
Image with painters painting interior suggesting in-progress project as step 2 in the painting process

2

Plan & Work
We start by preparing the surface: cleaning off debris and old coating, sanding rough or raised grain, and priming sections where the wood is dry or damaged. Once the surface is ready, we apply Sherwin-Williams or Benjamin Moore stain in even coats.
Image suggesting completed project as step 3 in the painting process

3

Enjoy Your New Space
Before we pack up, you walk the deck with us to confirm the finish looks right and meets your expectations. Your written workmanship warranty is handed over at that point, documenting what’s covered so you have it on file. You leave knowing the finish was confirmed in person and what’s covered if anything changes.

Your Dream Space is Just a Brushstroke Away!

Ready to give your home or office in Denver a fresh new look? Our expert deck staining experts deliver high-quality results you can trust.